Iscar is introducing Penta 34 carbide inserts utilizing a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer having a dissimilar frontal edge.

The new chipformer was fashioned for machining soft materials. It is an exceptional solution for parting bearing steel and other very ductile materials. It can be used at low feed: 0.03 to 0.10 mm/rev.

The combination of the revolutionary chipformer and IC908 grade provides excellent chip breaking and tool life results. The Penta 34-PB is available in a 1.5 to 3.0 mm width range, made from the versatile IC908 PVD coated grade. The new family advances the application range of Iscar's most economical grooving and parting PENTA 34 carbide inserts. The Penta 34-PB, when stacked up against to a competitor's cutter, is a winning solution for machining several soft and ductile material.

Iscar's Upgrades for Parting

Iscar has developed a new family of reinforced Tang-Grip blades for the popular TRAUB (TNL and TNK models) and INDEX (MS18C model) turn/mill machines. These blades, due to their reinforced construction, can be implemented in long overhang. Only the part of the blade required for penetration (cutting depth) has a reduced width. The rest is thick, which provides enhanced rigidity and stiffness. These blades are an superb solution for parting and grooving between the main and sub-spindle of turn/mill machines. The single-ended insert has a extraordinarily rigid clamping and therefore provides a very substantial advantage over any other system.

Further additions to Iscar's Grip family are Do-Grip carbide inserts made from the unique Sumo Tec carbide grades: IC807 IC808 and IC830. The brand new Sumo Tec grades significantly lengthen insert life, due to the greatest advanced coating technology followed by a special surface treatment. This also provides reformed tool life due to low surface stress and an evenly coated top surface. The even surface contributes to constant uninterrupted chip flow, less generated heat and less friction. The new process improves toughness and chipping resistance and thus diminishes friction and built-up edge. This in turn extends and prolongs tool life at increased machining conditions for all types of work piece materials. The new PVD process is made of Iscar's AL-TEC coating technology, utilizing the unique surface treatment.

Iscar's Chip Splitting Inserts
Iscar's new HM90 APCR 220605-CS grooved carbide inserts put an end to chip jamming dilemmas in rough milling of aluminum, where chips can pile up. They are a part of Iscar's growing Helialu HM90 line of inserts tailored specifically for aluminum milling. With 2 grooves pressed into every polished cutting face, the inserts split aluminum chips into a manageable size for easy, constant evacuation despite the application's characteristic high chip volume. The 22 mm inserts, each with two edges, are designed to optimize metal removal over the profuse range of aluminum roughing conditions, from high power/low speed to high power/high speed. They work especially well with Iscar's new HM90 EAL/FAL...22 aluminum rough milling cutters. Besides dependably clearing chips, the inserts conserve power and cut down chatter in long-overhang setups. The inserts feature a cavity on the bottom to ensure correct mounting in cutter chip pockets furnished with standard spring pins. For optimum chip control, Iscar recommends using the HM90 APCR chip-splitting insert only in cutters with an even number of flutes.

Iscar Adds Their Most Recent Innovations To A Lengthy Line Of Effective Hole Producing Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

Some Of The Countless Improvements In Carbide Inserts From Iscar From Over The Last Decade
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Iscar Releases A Revolutionary Line Of Slitting Cutters Applying Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Brand New End Mills Coming From Iscar Can Multiply Productivity While Lowering Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Commercial Water Heater - Considering All Of Your Needs - Study Cautiously To Know More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.

Automotive Manufacturing Jobs - What To Watch Out For And Why.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.

Brand New End Mills Coming From Iscar Can Multiply Productivity While Lowering Costs

The Most Recent In Carbide Endmill Configuration In A Lengthy And Prospering Family From Iscar

Commercial Water Heater - Considering All Of Your Needs - Study Cautiously To Know More

Automotive Manufacturing Jobs - What To Watch Out For And Why.

Justification Of Automotive Engineering Jobs.

Cutting Edge Cutters And Carbide Insert Configurations From Iscar To Better Enhance The Machining Procedure

Original Tools And Carbide Insert Configurations From Iscar To Better Enhance The Machining Procedure

Brand New Cutters And Carbide Insert Shapes From Iscar To Better Enhance The Machining Process

Cutting Edge Cutters And Carbide Insert Compositions From Iscar To Better The Machining Process

Brand New End Mills From Iscar Will Multiply Productivity While Shrinking Costs

Some Of The Numerous Improvements In Carbide Inserts Coming From Iscar From Over The Years

Several Progressions Have Multiplied Iscar's Line Of Indexable Endmills For Heightened Productivity

Water Filtration Systems

Fibroids Free Forever